ʻO ke alakaʻi hope loa no ka Carbide Tip Drill Bits: ʻIkepili ʻenehana, nā kikoʻī, a me nā noi

Ma ke ao o ka wili pololei,wili pahu carbide tip drille kū i waho ma ke ʻano he mea pono no ka hoʻopaʻa ʻana i nā mea paʻakikī e like me ke kila paʻakikī, ka hao, a me nā composites. Hoʻohui i ka lōʻihi me ka ʻokiʻoki kiʻekiʻe, ua hana ʻia kēia mau bits e hāʻawi i ka maikaʻi like ʻole i nā noi ʻoihana a me nā hana hana. Ma kēia alakaʻi holoʻokoʻa, ʻimi mākou i nā kikoʻī ʻenehana, ʻepekema waiwai, a me nā hihia hoʻohana like ʻole o nā carbide tip drill bits, me ka nānā ʻanaShanghai Easydrill, He mea hana nui Kina no ka oki ana a me ka drill bit.

He aha ka Carbide Tip Drill Bits?

He ʻoki ʻoki i hana ʻia nā bits drill tip Carbidetungsten carbide, he pūhui kaulana no kona ʻano paʻakikī (hiki i ka 90 HRA) a me ka pale ʻana i ka wela 59. Hoʻopaʻa ʻia ka piko carbide a hoʻopaʻa ʻia paha i kahi shank kila, e hana ana i kahi mea hana hybrid e kaulike ana i ka paʻakikī a me ke kūpaʻa. ʻOi aku ka maikaʻi o kēia mau bits i ka hoʻoheheʻe ʻana i ka wikiwiki, ʻoi aku ka maikaʻi ma nā wahi abrasive a i ʻole ka wela kiʻekiʻe kahi i hāʻule ʻole ai nā bits HSS (ke kila kiʻekiʻe).

ʻIkepili ʻenehana: Nā mea nui

ʻO ka hoʻomaopopo ʻana i nā ʻāpana ʻenehana o nā carbide tip drill bits e hōʻoia i ka hana maikaʻi loa:

1. Huina Mea
   • ʻO ka pahu kaʻa kaʻa (WC): He 85-95% o ka piko, e hāʻawi ana i ka paʻakikī a me ka pale ʻana.
   • Cobalt (Co): He mea hoʻopaʻa (5–15%), hoʻonui i ka paʻakikī haʻihaʻi.
   • Nā uhi: ʻO ka Titanium nitride (TiN) a i ʻole nā ​​ʻili daimana e hōʻemi i ka hakakā a hoʻolōʻihi i ke ola mea hana.
2. Geometry a me ka Hoʻolālā
   • ʻĀneki Lae: Loaʻa nā kihi maʻamau i ka 118° (ke kumu nui) a me ka 135° (nā mea paʻakikī), e hoʻonui ana i ka haʻalele ʻana a me ke komo ʻana.
   • Hoʻolālā ʻohe: Hoʻomaikaʻi ʻia nā ʻōheʻe spiral (2–4 flutes) i ka wehe ʻana i nā puʻupuʻu ma nā noi wili hohonu.
   • Nā ʻano Shank: Pololei, hexagonal, a i ʻole SDS shanks no ka hoʻohālikelike ʻana me nā drills a me nā mīkini CNC.
3. Nā Ana Hana Hana
   • ʻoʻoleʻa: 88–93 HRA, ʻoi aku ka maikaʻi o ka HSS ma 3–5x.
   • Kū'ē wela: Paʻa i nā mahana a hiki i 1,000°C me ka nalowale ʻole o ka ʻoki ʻana.
   • Laina RPM: Hana ma 200–2,000 RPM, kūpono no ka mīkini kiʻekiʻe.

Nā kikoʻī a me nā kūlana

Hoʻopili nā pahu pahu pahu Carbide i nā kūlana honua no ka pololei a me ka hilinaʻi:

No ka laʻana, hōʻike ʻia nā ʻāpana carbide maʻamau DIN6539 i nā ʻaoʻao pololei-ʻāina no nā anawaena puka mau, koʻikoʻi i ka aerospace a me ka hana kaʻa.

Nā noi ma nā ʻoihana āpau

He mea koʻikoʻi nā pahu pahu pahu Carbide ma nā ʻāpana e koi ana i ka pololei a me ka lōʻihi:

1. Aerospace
   • ʻO ka hoʻoheheʻe ʻana i nā alloys titanium a me nā composites carbon fiber, kahi mea koʻikoʻi ka lōʻihi o ka hana a me ka hoʻokele wela.
2. Kaʻa kaʻa
   • ʻO ka hana ʻana i ka ʻenekini poloka, ka hoʻoheheʻe ʻana i ka rotor, a me ka hana ʻana i nā ʻāpana pākahi EV.
3. Aila a me Gas
   • Hoʻohana ʻia i loko o nā mea hana hoʻoheheʻe downhole no ka hoʻokumu ʻana i nā pōhaku paʻakikī, me ka hoʻoikaika ʻana i ka pale ʻana i ka ʻaʻahu.
4. Kūkulu
   • ʻO ka wili ʻana i ke koʻa i hoʻoikaika ʻia a me ka masonry, i hoʻohui pinepine ʻia me nā drill hammer rotary.
5. Mea uila
   • ʻO nā substrate PCB micro-drilling a me nā ʻāpana semiconductor (nā anawaena e like me ka liʻiliʻi e like me 0.1 mm) .

No ke aha e koho ai iā Shanghai Easydrill?

Ma ke ʻano he kuhina nuimea hana mea hana okima Kina,Shanghai Easydrillhoʻohui i ka metallurgy kiʻekiʻe a me ka ʻenehana wili CNC e hana i nā ʻāpana carbide tip drill e hoʻokō i nā koi honua.

Nā Pōmaikaʻi Nui:

• ʻEnekinia Pololei: ʻO nā bits he CNC-ground i ± 0.01 mm ka hoʻomanawanui no ka hana mau.
• Hoʻoponopono maʻamau: ʻO nā uhi i hana ʻia (e laʻa, daimana no ke kalapona kalapona) a me nā geometries no nā hana kūikawā.
• Hōʻoia maikaʻi: Hana ʻia ʻo ISO 9001 me ka hoʻāʻo ʻana no ka paʻakikī a me ke kūpaʻa luhi.
• Loaʻa honua: Ua hilinaʻi ʻia e nā mea kūʻai aku ma ʻAmelika ʻĀkau, ʻEulopa, a me Asia no ka OEM a me nā noi ʻoihana.

Manaʻo kōkua no ka mālama ʻana i nā ʻāpana Carbide

• Hoʻohana ʻana i ka mea hoʻoluʻu: E hoʻohana i nā mea hoʻoluʻu wai e hoʻemi i ke kaumaha wela a hoʻolōʻihi i ke ola o ka mea hana.
• Hoʻoholo māmā: Hōʻalo i ka RPM kiʻekiʻe i mea e pale ai i ka ʻoki ʻana o ka carbide tip.
• ʻOi ʻana: E hoʻohana hou i ka hoʻohana ʻana i nā huila daimana no ka mālama ʻana i ke ʻoki geometry.